Sizes from 6 foot to 16 foot.

 

Sizes to fit most rectangle trampolines.

TRAMPOLINE LADDER 2 STEP* (36" Tall)
For Round & RectangleTrampolines up to 36" tall
SKU#: TLD2
*Adult supervision recommended for all trampolines with boarding ladders.

TRAMPOLINE LADDER 3 STEP* (40" Tall)
For Rectangle Trampolines up to 40" tall 
SKU#: JTL3
*Adult supervision recommended for all trampolines with boarding ladders.

4 Step Trampoline Ladder for Rectangle Trampolines 40" & Taller
For Rectangle Trampolines (40"+ Tall)
SKU#: TLD4
*Adult supervision recommended for all trampolines with boarding ladders.

 
 
 

BOUNCE BOARD SPECS:

• (Designed for 8 - 18 years, but older kids will love it too!) 
• Waterproof (Durable, Soft, Closed cell foam construction) Strong and Flexible with Great Shock Absorption
• Adjustable Foot Straps with Heavy Duty Hook & Loop Closure 
• Slip Resistant Fabric Bottom. 
• Super Lightweight at 4lbs. 
• Colors may vary
• 34" x 12" x 2" Board Size 
• SHIPPING DIMS 35"L x 13"W x 5" 
• 5 lbs.
• US PATENT NO. 6,196,558 and Patents Pending.

Features:

• GIANT! 11 Feet Across, 5 1/2 Feet High 
• Patent Pending No-Pole Safety Design.
• 3 Windows & 1 Door with Screens & Zippers
• Quick & Easy 3 minute Install

• 1-30mm Solid Brass Padlock
• 2-Padlock Keys
• 1-8 Foot Long 1/4" Inch Thick Black Vinyl 

Coated Steel Cable (5000lb Breaking Strength)

When used properly, the NET LOCK SYSTEM may help prevent accidents, injury or unauthorized use of your trampoline.

• STEP ONE: Begin by inserting the NET LOCK cable approximately 4" from the top of the net.
• STEP TWO: Holding each end of the cable, weave down, in and out of the net until there is a small space at the bottom of the net and the "eyelets" (end/tips of cable) come together in the front/outside of net.
• STEP THREE: Secure the NET LOCK SYSTEM with the lock, through the"eyelets."

Instructions for use:

It is best to use a spring tool as an aid to pull and attach the springs from the “V” ring on the trampoline mat to the frame holes. Using your hand can lead to getting “spring pinched” and also doesn’t properly tension the spring. Attach the spring hook down, to the “V” ring on the trampoline mat and using the “spring tool”, pull the attachment spring to the frame by inter-connecting spring hooks and pulling with one hand. When the attachment spring hook reaches the frame, use other hand to push it into the frame hole while disengaging the “spring tool”. 

Repeat until all springs are installed.

Use reverse procedure to remove springs from trampoline.
 

 

Frame Pads: Free from defect for 6 months.

Springs: 2 Years

Bed Stitching: 2 Years (Note: This applies only to the outer edge of  stitching that attaches the rings to the bed.)

Bed: Prorated against manufacturer's defects for 5 years as follows:

100% for the First Year. 50% for the Second Year. 35% for the Third Year. 20% for the Fourth Year. 10% for the Fifth Year from the date of purchase.(Note: This five-year prorated warranty applies only to the jumping surface. It does not cover the stitching on the outer edge.)

All other items: 30 days from date of purchase.

This warranty does not cover equipment that has been tampered with, subjected to negligent use, accidents, other damages, misuse or abuse, including such things as tears and rips, burns, cuts, snags, and scrapes.  Equipment or parts must be sent to us prepaid for our examination.